Non-metallic linear LED lighting for hazardous locations

Food Processing | Industrial | Marine | Oil Field
Class I, Division II | Class II, Division II | Class III | DLC

Standard Features:

  • Heavy-duty 3/16″-thick housing, reinforced to 3/8″ at hub openings
  • Impact-resistant 1/8″-thick lens with reinforced corners
  • Component-Assembly-Tray held captive by two nylon-coated, stainless steel cables
  • Toolless, cage-clamp terminal block
  • Two 3/4″ NPT conduit hubs reinforced with 1/16″ grounding plate and locknuts
  • Field-replaceable LED circuit boards and drivers with quick disconnects
  • Toolless entry via over-the-center cam latches

Additional Features:

  • Vibration-dampening, factory-installed mounting feet
  • Dimmable driver
  • Optional polycarbonate lens
  • Stainless steel, 45-degree, fixed-wall mounting kit available
  • Standard 10kV surge protection
  • 5-year warranty


  • Class I, Division 2, Groups A, B, C and D
  • Class II, Division 2, Groups F and G
  • Class III
  • Class I, Zone 2, Groups IIA, IIB, IIC, Zone 22 (ANSI/UL 844)
  • UL 844 hazardous locations
  • UL 1598A marine outside type
  • UL 8750 LED safety
  • UL 1598 wet locations
  • UL 924 emergency lighting
  • ABS type approved
  • cUL listed
  • 1.24 spacing criteria-compliant
  • 55°C ambient temperature
  • DLC Listed LED

Standard Materials:

  • Body: fiberglass reinforced PET resin
  • Gasket: one-piece silicone
  • Lens: acrylic
  • Hubs (2): A360 aluminum (less than .4% copper content)
  • Component tray: 5052-H32 aluminum (less than .4% copper content)
  • Latches: stainless steel
  • Mounting feet: stainless steel
  • Hardware: stainless steel

Contact Us

Request More Information

Request More Information

To receive a quote or request additional information, please complete the form below and we will contact you as soon as possible. Fields marked with an asterisk (*) are required.



Skip to content